DTF Heat Transfer

Boost Your Printing Business with DTF Technology

Looking for a faster, more flexible printing solution? DTF heat transfer is your answer.

With no need for pre-treatment and compatibility across multiple fabrics, DTF dramatically reduces production time and cost while delivering premium print results.

 

Whether you're printing T-shirts, uniforms, or promotional items, our DTF films ensure:

• Faster production cycles
• Lower waste
• Consistent output quality

• Single-side film - Only one side is printable (ink-receptive coating). The back side is smooth. Standard choice for daily production.
• Double-side film (anti-slip) - Only one side is printable. The back side has a matte/anti-slip effect to improve feeding stability. Recommended for long runs, higher-speed printing, or when slipping/misalignment happens.

1 - Print

Print the design onto the printable (coated) side of the DTF film.

2 - Apply Powder

While the ink is still wet, apply hot-melt powder evenly over the printed area, then shake off excess powder so only the design is coated.

3 - Cure / Dry

Cure (dry) the powdered film until the powder is fully melted and bonded to the ink layer (using your curing oven/powder shaker dryer).

4 - Heat Press Transfer

Place the film on the garment with the design facing the fabric. Heat press to transfer the design.

5 - Peel (Based on Film Type)

Peel the film according to the peel type you ordered.

Hot Tags: dtf heat transfer, China dtf heat transfer manufacturers, suppliers, factory